The blinds are assembled both in concealed and surface postioned styles. When purchasing, the type of the blinds need to be measured according to numerous assembly methods. Blinds concealed while in the window lattice, its length should be similar to the height of the window, but the width can be reduced by 1~2 cm from your left and right sides on the window. If the shutters are hung outside the window, then the length need to be about 10 cm longer versus height of the eyeport, and the width is about 5 cm wider versus the sides of the window to be sure a good shading effect. In general, small rooms for instance kitchens and toilets are built with concealed blinds, while large rooms just like living rooms, bedrooms, and dens are definitely suitable for use by using exposed blinds.
Look during quality tempered insulated glass
The blades on the blinds are an important component to the adjustment blinds. If buying blinds, it is better to first touch the louver blades to check out if they are smooth as well as, and see if every single blade will burr. Normally, high-quality blinds are better handled regarding blade details, especially louver blades manufactured from plastic, wood, and bamboo bedding. If the texture is better, its service life is going to be longer.
The adjustment rod is likewise an important part of the blinds. The adjustment lever on the blind has two characteristics, one is to adapt the lifting switch of the blind, and the other is usually to adjust the angle with the blade. When inspecting your adjustment lever, first hang the blinds and make an effort to pull it to see if the lifting switch is smooth, then turn the adjustment lever to see if the blade is also flexible.
The blades and many of the accessories, including the line frame, the adjustment icon, the pull wire, as well as the small accessories on your adjustment bar, must be kept while in the same color.
Check this finish
The smoothness on the blade and the insert frame is felt personally, and the good quality product is smooth and also flat, without the experiencing of stabbing hands.
Open the curtain along with test the opening and closing function on the blade
Rotate the adapting rod to open the blade, and the blades should maintain a great level between the blades, that is, the spacing way away between the blades is uniform, and the blades are kept straight and also have no feeling of bending down and up. When the blades usually are closed, the blades should possibly be in mutual agreement with the other person without leakage.
Check this deformation resistance
After the blade is opened, the blade might be pressed down by hand to generate the blade under the bend, and then your hand is quickly launched. If the blade is immediately restored on the horizontal state, no bending phenomenon appears, indicating the fact that quality is qualified.
Test automatic locking function
Should the blades are all made, pull the wire to retract the blade. At now, pull the wire for the right, the blade need to be automatically locked, keep the corresponding rolled up point out, neither continue to retract, nor loose. Otherwise, we have a problem with the locking function.